Monster HP Config

Description

Ever got beaten to tears because monsters were too strong?
Ever felt your build was so strong that battles stopped being fun?
Try this mod!
This mod lets you freely scale all enemies’ HP from 10% to 500% at once.
Want to make fights easier? Do it.
Want to turn every battle into a brutal survival test? Do it.
One slider. All enemies. Total chaos or total comfort — your choice.

你是否也有过因为怪太强，被打得哭唧唧的时候？
你是否也有过自己太强，一路平推爽都爽不完，反而觉得无聊的时候？
那就来试试这个模组吧！
这个模组可以让你一键统一调整所有怪物的生命值，范围从 10% 到 500%。
想轻松碾压？可以。
想让全场怪物都变成血牛噩梦？也可以。
一个设置，影响全部敌人。是想轻松，还是想受苦，全看你自己。

Installation instructions
1. Install the required dependencies first:
   - ModConfig
   - BaseLib, if your current Slay the Spire 2 mod setup requires it

2. Download the correct version of this mod for your game branch:
   - Use MonsterHpConfig for the normal/stable branch
   - Use MonsterHpConfigBeta for the beta branch

3. Extract the downloaded archive.

4. Put the mod files into your Slay the Spire 2 mods folder.

   The final files should look similar to this:

   Slay the Spire 2/mods/MonsterHpConfig.dll
   Slay the Spire 2/mods/MonsterHpConfig.json

   Or, for the beta version:

   Slay the Spire 2/mods/MonsterHpConfigBeta.dll
   Slay the Spire 2/mods/MonsterHpConfigBeta.json

5. Launch the game with mods enabled.

6. Open the ModConfig menu and adjust the enemy HP multiplier.

7. Start a run and enjoy your customized monster scaling.

Important:
Do not install the normal version and the beta version at the same time unless you know exactly what you are doing.
Use the version that matches your current game branch.安装方法：

1. 先安装前置：
   - ModConfig
   - 如果你的 STS2 模组环境需要 BaseLib，也请保持 BaseLib 正常安装

2. 根据你的游戏分支下载对应版本：
   - 正式版游戏使用 MonsterHpConfig
   - Beta 分支游戏使用 MonsterHpConfigBeta

3. 解压压缩包。

4. 将 .dll、.pck、.json 文件放入 Slay the Spire 2 的 mods 文件夹。

5. 启动游戏，并在 ModConfig 菜单中调整怪物生命值倍率。

注意：
正式版和 Beta 版不要混装。你当前玩哪个游戏分支，就安装对应版本。

Main features

Monster HP Config is a simple but powerful gameplay mod that allows you to scale all enemies’ maximum HP and current HP by percentage.
Whether you want:

• an easier run,
• a more ridiculous challenge,
• or just a fun way to rebalance combat,

this mod gives you full control.
Features

• Scale enemy HP from 10% to 500%
• Apply the change to all enemies at once
• Works as a global difficulty/customization tool
• Great for both:
• players who feel the monsters are too brutal
• players who feel their own build is too overpowered

In short
If monsters are bullying you, shrink them.
If you are bullying monsters, buff them.
If you want pure madness, push the slider and enjoy.

** Potential conflicts may occur with mods that:
- Replace enemy spawning logic
- Recalculate enemy HP after combat starts
- Modify the same enemy HP fields at the same timing
Changing the multiplier usually affects newly initialized enemies.
If something looks wrong, try starting a new combat or a new run after changing the setting.

怪物血量调节器 是一个简单直接、但非常实用的玩法模组。
它可以让你按照百分比，统一调整所有怪物的最大生命值和当前生命值。
不管你是想：

• 降低难度，打得更轻松；
• 提高难度，挑战更离谱的战斗；
• 还是单纯想按自己的喜好重新平衡战斗体验；

这个模组都能满足你。
功能特点

• 支持将怪物生命值调节到 10%～500%
• 一次性作用于所有敌人
• 可作为全局难度调节工具使用
• 非常适合：
• 觉得怪物太强、想轻松一点的玩家
• 觉得自己太强、想让战斗重新刺激起来的玩家

一句话总结
怪太强？削它。
你太强？加强怪。
想整点狠活？直接拉满。

** 可能产生冲突的情况包括：
- 其他模组重写了敌人生成逻辑
- 其他模组在战斗开始后重新计算敌人生命值
- 其他模组在相同时机修改同一批敌人生命值字段
倍率修改通常会影响之后初始化的敌人。
如果显示或数值看起来不对，可以重新开始一场战斗。

Requirements
Required:
- Slay the Spire 2
- ModConfig

Recommended / depending on your mod setup:
- BaseLib

Notes:
This mod uses ModConfig to provide in-game configuration options.
Make sure ModConfig is installed and loaded correctly before using this mod.

You should also use the correct version of the mod for your current game branch.
The stable version is intended for the normal branch.
The beta version is intended for the beta branch.需求：

必需：
- Slay the Spire 2
- ModConfig

根据你的模组环境可能需要：
- BaseLib

说明：
本模组通过 ModConfig 提供游戏内配置选项。
请确保 ModConfig 已正确安装并正常加载。

另外，请确认你安装的是对应游戏分支的版本：
正式版游戏使用正式版模组，Beta 分支游戏使用 Beta 版模组。

Shout outs
Thanks to the Slay the Spire 2 modding community for tools, examples, and documentation.

Special thanks to the creators and maintainers of ModConfig and BaseLib.
This mod would not be as convenient to use without the configuration tools provided by the community.

Thanks to everyone who tested the mod, reported issues, or helped improve the localization.
Extra thanks to my Russian friend for pointing out that the old Russian localization was absolutely not acceptable.鸣谢：

感谢 Slay the Spire 2 模组社区提供的工具、示例和文档。

特别感谢 ModConfig 和 BaseLib 的作者与维护者。
没有这些社区工具，这个模组不会这么方便使用。

也感谢所有参与测试、反馈问题、帮助改进本地化的人。
尤其感谢指出旧版俄语本地化问题的俄罗斯朋友——那版确实该重做。